56
Previously created arrays will be stored under this tab. Recovering an array from here
will attempt to recover
a ‘
disabled’
array and make
it ‘
normal’
.
The Recover List will list all your previous and current created arrays. Each entry will
list the following properties:
•
Array name
•
RAID level
•
Array Capacity
•
Time created (YYYY/MM/DD, HH/MM/SS, 24 hr clock format)
•
Location of physical drives
•
Model of physical drives
Important:
When recovering an array, it is important to note the
location
and
model
of
each physical drive because you can
only
recover using those
exact
positions and drive
model.
How to Backup your Recover List
The recover list is a record of your previously created arrays containing the model and
location information of your physical drives. Recovering from the list could help bring
a
disabled
array back to
normal
status for emergency data retrieval.
To backup your recover list:
1.
Log in to WebGUI
2.
Click
Recover
Tab
3.
Click
Backup to File
Note
: The file will be saved as
hptrec
.
rec
How to Reload your Backup Recover List
In the case that you cleared the recover list or it does not appear for any reason, you
can recover it if you saved the list beforehand.
To reload your recover list
1.
Log in to WebGUI
2.
Click
Recover
Tab
3.
Under
Update Recover List
click
Browse
…
4.
Locate your previously saved
hptrec
.
rec
file and select it
Note
: loading a back up recover list will completely replace the current recover list.
5.
Click
Submit