6
Configuring and Using the RocketStor 5212
Using the RocketStor 5212 -- step by step
1.
To install a drive: Carefully align the SATA device’s gold fingers with
the bay’s SATA connector. Gently push the device straight down
until secure.
2.
The rear panel of the RocketStor 5212
provides a single Thunderbolt™ port
that can be connected to any
Thunderbolt™ capable Mac platform
using a Thunderbolt™ cable.
3.
Connect the power adapter to the DC-In port (rear of the
RocketStor 5212). The top of the storage dock will emit blue light
when fully powered on. And the SATA bay is powered on.
4.
The RocketStor 5212’s Thunderbolt™ driver is embedded into Mac
OS X. SSDs and hard drives installed into the SATA bays will be
automatically recognized by OS X.
