Highlight MAGNUM 1300 TB-U, Operation Manual

Page: 13 / 53

MACHINE PLACEMENT
Inspections
Before installation, inspect the entire machine for visual damage. If found, please report
this damage to the truck line.
Highlight Industries has taken every precaution during the
packaging and loading of this equipment. However, it is YOUR RESPONSIBILITY to
inspect for damage before installation.
Positioning of the Machine
Place your Magnum® Case Sealer close to an area where you will be sealing your loads.
Make sure that there is sufficient room to load/unload the machine and that you do not
stretch the wiring cable. Remember, you will need to provide electrical service to a 120
VAC, 10 Amp-outlet. DO NOT USE EXTENSION CORDS!!
Floor Weight Bearing/Stress Tolerance
The floor must be able to bear the weight of the machine, plus the weight of the
maximum load, which is 75 lbs, plus a safety factor. The floor must also be able to
tolerate the stress of the machine’s operation.