Highlight 200201, Manual

Page: 21 / 32

20
Ordercode: 200201
TF-300 Fresnel CW
6. DMX Lost Mode
In this menu you can determine the behaviour of the Fresnel in case of a DMX failure.
01) While in the main menu, press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 3 options:
The device will fall back on the last properly working DMX signal from before the DMX
signal error, which ensures undisrupted performance.
The device will black out in case of a DMX failure.
The device will fall back on the last working settings from Manual mode.
04)
Press the ENTER button to confirm.
7. Fan Mode
In this menu you can control the speed of the fan.
01) While in the main menu, press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to set the speed of the fan. Choose one of the 3 options
.
04) Press the ENTER button to confirm.
8. PWM Frequency
In this menu you can set the PWM frequency.
01) While in the main menu, press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to set the device’s PWM frequency. The adjustment range is between
, in increments of 10Hz.
04) Press the ENTER button to confirm.
9. Display
In this menu you can set the backlight of the display.
01) While in the main menu, press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 3 options:
The display will turn off in 60 seconds.
The display will be continuously on.
The display will be off.
04) Press the ENTER button to confirm your choice