background image

11 

 

A

 

B

 

Residual heat indication

 

After the cooking zone is turned off, or the cooktop is fully switched off, the cooking zones may 
still be hot and indicate[ H ] on the display. 
The symbol [ H ] disappears when the cooking zones may safely be touched. 
When the residual heat indicators are on, don’t touch the cooking zones and don’t put any heat 
sensitive object on them. 

There is a risk of burns and fire.

 

 

Booster function

 

The Booster function [ P ] and the Double Booster [ 

] grant a boost of power to the selected 

cooking zone. 
If this function is activated the cooking zones operate for 10 minutes with an extra high power. 
Booster is ideal for example to heat up large quantities of water rapidly when cooking pasta. 

 

 

Start up / Stop the Booster function:

 

Action

 

Control panel

 

Display

 

Start up the Booster 

 
 

Stop the Booster 

slide to the end of the “SLIDER” 
or press directly on the end of 
the “SLIDER” 
slide on the “SLIDER“ 

[ P ] 

 
 

[ 9 ] to [ 0 ] 

 

Start up / Stop the double Booster function:

 

Action

 

Control panel

 

Display

 

Start up the Booster 

slide to the end of the “SLIDER” 
or press directly on the end of 
the “SLIDER” 

[ P ] 

Start up Double Booster 
Stop the Double Booster 
Stop Booster 

re-press key [ P ] 
slide on the “SLIDER“ 
slide on the “SLIDER“ 

and P ] 

[ P ] to [ 0 ] 
[ 9 ] to [ 0 ] 

 

Power management:

 

The cooktop is divided in 2 or 3 (dep. on model) separate sets of cooking zones, each set 
having a maximum power. 

 

 

 

 

If the selected heating levels for the jointly managed zones exceed the maximum available 
amount of power, the power management function automatically reduces the power from one of 
these zones. The display of this zone  blinks first; the level is then automatically reduced to the 
highest possible setting. 

 

Heating zone selected 

The other heating zone: (example: power level 9)

 

[ P ] is displayed 

[ 9 ] goes to [ 8 ] and blinks 

 

To activate the Booster function (or double Booster) on several cooking zones at the same time 
use separately power-managed  zones (A-B, A-C, B-C or A-B-C). 

 

B

 

 

C

 

A

 

C

 

A

B

 

B

A

 

Summary of Contents for HIX604B1






















Reviews: