background image

ALTIWARE SERIES

13

english

alterra/aerial

14

english

TIME FUNCTIONS

english

MODES OF OPERATION

CHRONOGRAPH 

DATA

ALTIMETER LOG

SKI CHRONOGRAPH

CHRONOGRAPH

ALARM

VIEW TIME ZONE 1 / TIME ZONE 2

The Alterra/Aerial unit is equipped with a full feature wrist watch 
package including Time of Day, Day/Date/Day of Week, Two Time Zones 
and Two Daily Alarms. 
The Time Zone being displayed is indicated by a small 

T1/T2

 in the 

lower left corner of the display. 

 

VIEW / CHANGE TIME ZONE

PRESS & HOLD

 the 

S2

 key

SETTING THE TIME OF DAY

1.

   Start in 

TIME

 Mode.

2.

   Select 

TIME 1

 or 

TIME 2

 using the 

S2

 key.

3.

  

PRESS & HOLD

 the 

S5

 to enter the setting sequence.

4.

   Adjust 

HOUR, MINUTES, SECONDS, YEAR, MONTH, DATE, 

12/24 HOUR

 mode using the 

S1

 and 

S2

 keys. The variable being 

programmed (Hours, Min, Sec, etc.) will be shown in the Bottom 
Line of the display.

5.

   Set each variable using the a 

QUICK PRESS 

of the

 S4

 key. 

6.

   Exit setting sequence using the 

S5

 key.

7.

   Select alternate time and repeat the above procedure.

MAIN DISPLAY MODES 

(continued)

Summary of Contents for Aerial






















Reviews: