7, Controller Panel mode
Operation by DMX Multi function controller
Press “MODE” to select DESK mode.
Operation by IR remote
Press “SET ADDR” and “6” “8” “9” to select DESK mode.
There are five main functional operation for the controller panel:
1, select color mode:
Press “color select” button, the corresponding small LED light is on, then you can
press: RED
ORANGE
YELLOW
GREEN
CYAN
BLUE
PURPLE
MAGENTA
WHITE to choose your preferable color.
You can adjust R G B brightness via “R” “G” “B” sliders.
2, select built-in programs mode:
Press “PROG SELECT” button, the corresponding small LED light is on, then you
can select the built-in programs via “PROG SELECT” slider.
If you select R, G, B, RG, RB, GB, RGB, then adjust its brightness via “SPEED”
slider.
If you select R CHANGE, G CHANGE, B CHANGE, RGB CHANGE dream fading,
then adjust the running speed via “SPEED” slider, adjust the sensitivity level via
“FLASH/SENSITIVITY” slider.
If you select “COLOR FADE”, adjust the running speed via “SPEED” slider, adjust
fading time via “FLASH/SENSITIVITY” slider.
If you select “SOUND”, then adjust sensitivity level via “FLASH/SENSITIVITY”
slider.
3, Auto Run mode:
Press “AUTO” button, the corresponding small LED light is on. Now you can change
the running speed via “SPEED” slider, the frequency of flash via “flash/sensitivity”
slider and the fading time via “PROG SELECT” slider.
4, SOUND ACTIVE mode:
Press “SOUND ACTIVE” button, the corresponding small LED light is on. Then you
can change the sound active sensitivity via “flash/sensitivity” slider. “PROG
SELECT” slider and “SPEED” slider is no use now.
5, press “HOLD”,
the corresponding small LED light is on, then you can lock
the current operation. Press again, then no “lock” situation.
