6
The strap should be adjusted to a length that is snug but will allow you to
comfortably put two fingers between the stimulus probes and your dog’s neck.
Adjusting the collar strap is simple but, tricky in that the slider will not move
without first sliding out the top strap layer. Slide the top strap layer out of the
slider then adjust the strap to desired length using the male buckle end. Move
the slider close to the male buckle and insert the top strap layer through the
slider. This will prevent the slider from moving.
IMPORTANT NOTE: Your Bluefang collar is not intended to be used as a
restraining collar.
ADJUSTING THE COLLAR STRAP
TURNING ON YOUR COLLAR AND REPLACING THE BATTERY
The collar battery also functions as an on/ off switch. Turn on your collar by
rotating the battery module clockwise. The battery acts as a 3 position switch.
The positions are ON, OFF and REMOVE. From the ON position, rotate counter-
clockwise to turn it OFF. Rotate one more click counter-clockwise to remove. To
conserve battery life we recommend you turn the battery to the OFF position
when the collar is not in use. To
install a new battery align the
arrow on the battery with
“Remove” text. Then, turn
clockwise to “Off” or “On”
position. The logo will blink and
the collar will beep when it
successfully powers up.
