14
STEP 24: Drill Lock Hasp mounting holes
Using the
3/32”
drill bit drill (2) holes within the slots
of the Lock Hasp.
STEP 25: Screw Lock Hasp to your sliding glass door
Attach the Lock Hasp to your sliding glass door with (2)
#6 X 1/2 round head sheet metal screws.
STEP 27: Apply Weather Stripping
Peal the adhesive backing from the first 2 inches of the
weather stripping. Starting at the bottom, apply the
weather stripping to the inside edge of the open side
of the assembled door panel removing the adhesive
backing as you move up.
If using the Universal Lock Assembly, cut at the bottom
of the lock and restart above the lock.
Continue to the top of the Top Frame Assembly and
cut.
INSTALLING THE VACATION LOCK
The Vacation Lock provides added security when away from your home for extended periods. It requires
drilling a 1/
4” hole
at the bottom of your stationary patio door and 2 small holes in your sliding glass
door. If you choose to use the Vacation Lock. Follow STEPS 28
–
34. If not, proceed to Step 34.
Fig 26
Fig 24
Fig 25
Fig 27
Summary of Contents for Armor Flex
Page 1: ...Armor Flex Low E Patio Pet Door Installation Manual TM ...
Page 3: ...3 Fig 3A ...
Page 4: ...4 Figure 3B ...
