How to use it:
1.
Fly Hesper to any position (the origin). Then tap the
“
Orbit
”
on the left side of the
interface, and select.
2.
In the settings interface, drag the drone icon to the blue area to set the altitude
and the radius of the orbit. The horizontal axis shows the radius, and the vertical
axis shows the altitude. Please make sure that there is no obstacle near the orbit.
Theaircraftwillflytothepositionwhereyoudragitto.Theradiusandthealtitudewillbe
displayed on the screen as follows. After you’ve set the radius and the altitude, tap
the “Start” button to go to the control interface.
3.
In the control interface, the two round buttons respectively represent
counterclockwise orbiting and clockwise orbiting, as shown below. Click the left
button, and the aircraft will
flyandrecordvideoaroundtheorigincounterclockwisewiththesetradiusandattheset
altitude;Clicktherightbutton,andtheaircraftwillflyandrecordvideoaroundtheorigin
clockwise. The duration will be displayed at the top of the interface.
