manualshive.com logo in svg

High-Flying HF-LPB100, User Manual

Share
Download
High-Flying HF-LPB100 User Manual Download Page 24

HF-LPB100 Low Power Wi-Fi Module User Manual 

Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com) 

- 24 - 

 

Direct Download and Upgrade 

AT+UPURL command to set the remote directory and file name, such as: 

AT+UPURL=http://www.hi-flying.com/!admin/down/,lpb.bin 

After excuate 

this command, the module will directly download the “lpb.bin” file from remote directory 

and start upgrade Application. 

Notes: 

please contact with high-flying technical people before upgrade firmware, or maybe damage 

the module and can‟t work again.

 

2.7.

 

GPIO/PWM Function 

HF-LPB100 module can provide many GPIOs, which include max 6 PWM/GPIO control pins. User 

devices can read/write GPIO/PWM pins status. 

Table 7     HF-LPB100 GPIO/PWM Pin Mapping Table 

 

 

 

 

 

 

When module works at PWM mode, PC and other devices can setup connection (TCP/UDP) through 

WiFi, then read/write GPIO/PWM information through command data.

 

 

GPIO n OUT 0, 

Set GPIOn as output and output „0‟, Response GPIO OK or GPIO NOK; 

 

GPIO n OUT 1, Set 

GPIOn as output and output „1‟, Response GPIO OK or GPIO NOK; 

 

GPIO n GET, Read GPIOn pin status, Reok=1 or GPIO NOK 

 

GPIO n SET, Save GPIOn set, Response GPIO OK or GPIO NOK 

 

PWM n frequency duty, Set PWMn Channel output, Response GPIO OK or GPIO NOK 

 

PWM n GET, Read PWMn Channel set, Reok=frequency duty or PWM NOK 

 

PWM n SET, Save PWMn Channel set, Response PWM OK or PWM NOK 

Notes:

 Please refer to Appendix B for details to use GPIO/PWM. 

2.8.

 

 SOCKET B Function 

HF-LPB100 support double socket communication, the socket B function is disabled by default. 

 

GPIO 

Configured Function 

Describtion 

Default Setting 

Type 

GPIO11  PWM/GPIO Channel  

PWM_1 

GPIO11 

I/O  

GPIO12  PWM/GPIO Channel 

PWM_2 

GPIO12 

I/O 

GPIO15  GPIO Channel  

GPIO15 

GPIO15 

I/O 

GPIO18  PWM/GPIO Channel 

PWM_3 

GPIO18 

I/O 

GPIO20  PWM/GPIO Channel 

PWM_4 

GPIO20 

I/O 

GPIO23  GPIO Channel 

PWM_5 

GPIO23 

I/O 

Summary of Contents for HF-LPB100


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands