High End Systems Universal Controller, User Manual Addendum

Page: 10 / 12

Page 8 Addendum UN-1
Selecting Master, Slave or Neither Mode
1. Power ON the controller or press the <Select> button to return to the Main menu, shown
below:
2. Press the <Menu> button, then use the arrow keys around the <Menu> button to select the MIDI
menu option (it will blink).
3. Press the Adjust 1 <Down> arrow key. This displays a list of menu options.
4. Use the arrow keys around the <Menu> button to select the M/S option (it will blink).
5. Press the Adjust 1 <Down> arrow key. This displays a menu similar to the one shown below:
6. The menu above configures the controller as neither a master nor a slave. Do one of the
following:
• If you wish to configure the controller as neither a master nor a slave, press the
<Record>
button to save this selection and return you to the Main menu.
• Press the
<Right>
and
<Left>
arrow keys beside the Menu button to select either Master or
Slave (your selection will blink).
• Press the Adjust 1
<Down>
arrow key to select “no” or press the Adjust 1
<Up>
arrow key
to select “yes”.
7. When you have configured your controller as master, slave or neither, press the
<Record>
button to save this selection and return you to the Main menu.
DIM READY PAGE
99
←
M
→
001
MASTER SLAVE
no no