High End Systems studio color, User Manual

Page: 30 / 114

1-4 Studio Color User’s Manual
Before You Begin Installation
Warning: Before you begin the installation read the following safety precautions.
1. Disconnect the fixture from power before removing the cover or changing the
lamp.
2. Allow the unit to cool for at least five minutes before removing cover or
accessing the lamp.
3. Wear protective gloves and goggles when working inside the unit.
Power Requirements
The following items must be used to provide power to Studio Color:
• 12 AWG stranded THHN or equivalent
• Branch Circuit Protection
• 20 A, high-surge thermal breakers (GE THQB, THQL, or equivalent). Refer to
Table 1.1.
Note: do not use magnetic type circuit breakers .
Table 1.1: Breaker Requirements
575-S 575-M
Voltage Number of Fixtures per 20 A Breaker
110 3 n/a
208 5 3
230 6 4