High End Systems SolaSport Pro 2000, User Manual

Page: 36 / 54

• Press the Enter button to confirm.
• Select “Auto Pro Part 1”, “Auto Pro Part 2” or “Auto Pro Part 3”, and then select which Slave program is to be sent. Selection “Part
1” means, that the Slave unit runs the same program as the master units.
• Press the Enter button to confirm.
• Press the MODE/ESC button in order to return to the main menu.
4. Program selection for Edit Program
• Select “Edit program” by navigating with the arrow key.
• Press the Enter button to confirm.
• Select “Edit program” by navigating with the arrow key.
• Press the Enter button to confirm.
• Select the desired program. With this function you can edit specific scenes into a specific program.
• Press the Enter button to confirm.
• Press the MODE/ESC button in order to return to the main menu.
5. Automatic Scene Recording
• Select “Edit program” by navigating with the arrow key.
• Press the Enter button to confirm.
• Select “Edit scenes” by navigating with the arrow key.
• Select the desired scene numbers. You can program a maximum number of 250
• Press the Enter button to confirm.
• Press the MODE/ESC button in order to return to the main menu.
Example:
Program 2 includes scenes: 10, 11, 12, 13
Program 4 includes scenes: 8, 9, 10
Program 6 includes scenes: 12, 13, 14, 15
Auto Pro Part 1 is Program 2;
Auto Pro Part 2 is Program 3;
Auto Pro Part 3 is Program 6
The 3 Slave groups run the Auto Program in certain time segments, as shown in the following picture:
36