FQ-100 Fog Generator User Manual
6
Setup
Mounting
This model can be operated at a floor level or sitting on any regular surface.
Filling the Tank
This product is warranted for use only with Atmospheres® fog fluid.
To fill the tank:
1.
Place fog machine on a flat surface and remove fog liquid tank cap.
2.
Fill with Atmospheres fog liquid about 3/4 full and replace cap.
Starting up the Unit
Plug the power cord into a grounded electrical outlet. Turn the power switch to
“ON”. Warm-up is complete when the display shows “
Ready to Fog
”
CAUTION!
Do not allow the unit to have more than a 35° angle of
inclination.
CAUTION!
When using Atmospheres fog fluid, always make sure there
is sufficient liquid in the fog liquid tank. Operating this unit
without liquid will cause damage to the pump as well as
over-heating of the heater.
If your FQ-100 Fog Machine fails to work properly,
discontinue use immediately. Drain all fog liquid from the
tank, pack the unit securely (preferably in the original
packing material), and return it to your FQ-100 dealer for
service.
Keep fog machine upright.
Turn off or unplug when not in use.
This machine is not water or splash-proof. If moisture,
water, or fog liquid gets inside the housing, immediately
unplug the unit and contact a service technician or your
FQ-100 dealer before using it again.
There are no user serviceable parts inside. Always refer
your FQ-100 dealer or other qualified personnel for
servicing.
Summary of Contents for FQ-100
Page 7: ...vi...
