manualshive.com logo in svg

High End Systems CATALYST DV, User Manual

The High End Systems CATALYST DV is an exceptional product that empowers lighting designers with its advanced features. For a seamless user experience, make sure to download the comprehensive User Manual for free from our website. Explore the full potential of the CATALYST DV to enhance your lighting designs and create stunning visuals.

Share
Download
background image

Catalyst® V3 Media Server User Manual

33

Chapter 5:
Output Displays

The Catalyst Media Server supports two output signals. Each signal is split, and can be 
displayed simulataneously on any output device (DL1 digital light, video projector, LED 
wall, etc.) and a monitor display. 

DV1 Video Distribution Amplifier

The Catalyst Media Server uses the DV1 dual video distribution amplifier to split and 
amplify the PowerMac’s two video outputs for display on preview monitors as well as 
output devices. In addition, five BNC video connectors labeled R, G, B, H, and V (Red-
Green-Blue-Horizontal sync-Vertical sync) are provided to send Output 1 to a device using 
high-quality 75-ohm video cable.

Catalyst Interface Box (CIB)

The Catalyst Interface Box is an interface between the DMX console and the computer’s 
Universal Serial Bus (USB) port. In addition, five RGBHV connections are provided to 
send 

Output 2

 to a device using high-quality 75-ohm video cable.

CAUTION!

 

Using a video cable longer than 

250 feet

 (80 meters) can 

degrade video performance.

P1

 and 

P2

 Monitor Ports

RGBHV BNC connectors

RGBHV BNC connectors

Summary of Contents for CATALYST DV

































































































































































































































Reviews:

No comments

Related manuals for CATALYST DV

Canon imagePRESS Server G200 Service Manual preview
imagePRESS Server G200
Brand: Canon Pages: 82
Canon P 400 Service Manual preview
P 400
Brand: Canon Pages: 88
IBM Netfinity 6000R User Reference Manual preview
Netfinity 6000R
Brand: IBM Pages: 218
IBM eserver xSeries 440 Troubleshooting Manual preview
eserver xSeries 440
Brand: IBM Pages: 74
IBM eserver xSeries 440 Installation Manual preview
eserver xSeries 440
Brand: IBM Pages: 98
IBM eserver xSeries 440 User Manual preview
eserver xSeries 440
Brand: IBM Pages: 84
IBM Eserver xSeries 360 Type 8686 User Reference Manual preview
Eserver xSeries 360 Type 8686
Brand: IBM Pages: 184
IBM eserver xSeries 350 Installation Manual preview
eserver xSeries 350
Brand: IBM Pages: 62
IBM eServer xSeries 135 Installation Manual preview
eServer xSeries 135
Brand: IBM Pages: 62
IBM eserver pSeries 690 User Manual preview
eserver pSeries 690
Brand: IBM Pages: 212
IBM System x3690 X5 At-A-Glance Reference Manual preview
System x3690 X5
Brand: IBM Pages: 32
IBM System x3690 X5 At-A-Glance Manual preview
System x3690 X5
Brand: IBM Pages: 33
IBM System x3690 X5 Installation And User Manual preview
System x3690 X5
Brand: IBM Pages: 180
IBM pSeries 670 Service Manual preview
pSeries 670
Brand: IBM Pages: 1032
GDC SX-2000A Series User Manual preview
SX-2000A Series
Brand: GDC Pages: 185
aizo digitalSTROM-Server Installation Notes preview
digitalSTROM-Server
Brand: aizo Pages: 2
Supermicro SUPERSERVER 6034H-X8R User Manual preview
SUPERSERVER 6034H-X8R
Brand: Supermicro Pages: 128
IntesisBox Modbus Server-FC330A Installation Manual preview
Modbus Server-FC330A
Brand: IntesisBox Pages: 5

Brands by name

Popular brands

Load more brands