Before you start with the installation of the sound system, disconnect by any means the GROUND connection
wire from the battery, to avoid any risk of electric shock and short circuits.
REFERENCE NOTE
INSTALLATION INSTRUCTIONS
| ENG
19
MECHANICAL INSTALLATION
Avoid any damage removing of the components of the vehicle like wires, cables, board computer, seat belts, gastank or the like.
Ensure that chosen location provide sufficient air circulation for the amplifier. Do not mount the device into small or sealed spaces without
air circulation near by heat dispersing parts or electrical parts of the vehicle.
Do not mount the amplifier on top of a subwooferbox or any other vibrating parts, thereby parts in the inside of the amplifier may get loosen.
The wires and cables of power supply and the audio signal must be as short as possible, to avoid any losses and interferences.
2
1
4
3
At first you need to find a suitable location to
install the amplifier into the vehicle.
Observe that there remains enough space
for the installation of the cables and ensure
that they will not be bended and have sufficient
pull relief.
Keep the amplifier at the chosen mounting
location in the vehicle.
Then mark the four drill holes with a
appropriate pen or peening tool through the
designated mounting holes at the amplifier.
Put the amplifier aside and then drill the holes
for the mounting screws at the before marked
locations.
Please ensure not to damage any components
of the vehicle while drilling the holes.
Alternatively (depends on the material of the
surface) you can also use self-tapping screws.
Then uphold the amplifier to the chosen
position and fix the screws through the
mounting holes into the drilled screwholes.
Ensure that the mounted amplifier is fixed
tight and not get loosen while driving.
Vehicle
Pen or
peening
tool
Amplifier
4 x
Vehicle
Drill
Marking
4 x
Vehicle
Amplifier
Vehicle
Mounting
screws
Amplifier
4 x
