HIFEI Technology Fulcrum Pro 300A Manual Download Page 11

Fulcrum Pro/Pro+ 300A Brushless Speed Controller Manuals                  www.hifei.com

 

 

 

Part VI  : Warranty Clause  

    Thanks for purchasing Hifei Brushless Electronic Speed Controller (ESC). Here we guarantee all 
Hifei ESC is made by strict workmanship standards and rigorously tested before leaving the factory. 
But as ESCs are usually working under atrocious environment and other possible damage during 
transportation, we commit under-warranty service and disclaimer in accordance with the following 
clauses. We reserve the rights to change clauses without notification in advance. 
 
    Hifei Brushless ESCs are used for radio controlled electric model airplanes, boat s and cars. Which 
are not toys, and must be used with much care. It is required to read the ESC user-manuals and 
warnings before using. This warranty does not cover abuse, neglect, or damage due to incorrect 
wiring, over voltage, or overloading. 
 
    Please read the warranty clause carefully. When request warranty, it is required to fill out the ‘ 
Warranty Form’ and send one copy of the form and a copy of purchase receipt with the ESC 
together  back to factory. Please note we do not accept request for refunding. 

 

All Hifei ESCs are warranted  for one year since the date of purchase from Hifei authorized dealers 
which comply with the following under-warranty clauses. 

 
 
 

 

In the following conditions, you can request a new replacement within 15 days since the purchase 
date. 

(Purchase receipt or invoice must be provided)

 

 

 
 
 

The requested ESC must keep in new condition. 
a) New ESC you got has defect on components or workmanship; 
b) New ESC you got works abnormally in first testing. 

Note: any change to a new ESC ( such as cutting short cables, unpack ESC, etc) will be disclaimed. 

 
 
 

In the following situations, we commit free repairing to requested ESC. 

 
 
 

Purchase receipt and warranty form are required to ship back together with the ESC. 
 

a) the date exceeds 15 days , the defective ESC will be repaired and shipped back. 
b) the ESC can not work or be damaged in testing, which is caused by the quality defects of ESC 
within the valid warranty date. 
 

Note: You bear the shipping cost for returning, and we pay the cost for shipping the repaired ESC back 
to you. 
We promise to repair the returned ESC and ship it within 5 working days since we received it. 

 

VI A: Under Warranty Conditions

 

1) Replacement 

 

2) Repair 

 

Page 21

 

Fulcrum Pro/Pro+ 300A Brushless Speed Controller Manuals                  www.hifei.com

 

 

VI B: 

Disclaimer Conditions

 

In any of the following conditions, we disclaim the warranty  
a)  The purchase date over 1 year. 
b)  A valid purchase certificate and/or warranty form in not provided.

 

c)  ESC was damaged due to not following the manuals or any misuse, such as overload using ESC, 

ESC’s on-board overloading, affected by the humidity, incorrectly soldered connectors, incorrect 
polarity the controller, misuse on other application, disconnect ESC from battery while motor is 
rotating, etc.

 

d)  The ESC is changed, disassembled and repaired by yourself or any other third party without 

authorization from Hifei in advance.

 

e)  The ESC is severely damaged and be irretrievable.

 

 
 

 
We also provide charge-repairing service to Hifei ESC which is disclaimed warranty. According to the 
damage degree of the ESC, we will notify you the repairing fee and get your agreement before repair 
it.  
 

Note: you pay all the shipping cost. 

 
When request warranty service, please firstly contact the shop where you purchase the ESC, or send e-
mail to [email protected] to describe the ESC problem, you will receive an authorized 
RMA number from Hifei. Please write the RMP number on ‘ Warranty Form’.

 

VI C: 

Charged Repairing Service

 

Page 22

 

Summary of Contents for Fulcrum Pro 300A













Reviews: