1.Technical Parameters
Model
Description
Power Option
Color Option
Mini-LSS62
Mini Stainless Steel AISI-316 Light
6W
9W
Single
RGB
Mini-LPC62
Mini Plastic Light
3W
5W
Single
RGB
Mini-LPC94
Mini Plastic Light
6W
Single
RGB
Mini-LSS95
Mini Stainless Steel AISI-316 Light
6W
Single
RGB
Mini-LPC95
Mini Plastic Light
6W
Single
RGB
Mini-LSS105
Mini Stainless Steel AISI-304 Light
9W
12W
Single
RGB
Mini-LSS105
Mini Stainless Steel AISI-316 Light
9W
12W
Single
RGB
Mini-LPC125
Mini Plastic Light
9W
Single
RGB
Mini-LSS150
Mini Stainless Steel AISI-316 Light
6W
9W
Single
RGB
Mini-LPC150
Mini Plastic Light
6W
9W
Single
RGB
2. Before Installation
1) Please turn off the power before installation to avoid electric shock caused by improper operation. Non-
professional and technical personnel are not allowed to repair or modify this product;
2) Please pay attention to checking whether the voltage marked on the underwater light is consistent with the
input voltage to be connected before installation, so as not to damage the LED underwater light;
3) This lamp is designed with waterproof and moisture-proof functions, and its waterproof level can reach
IP68. The lamp is able to work in an environment of 100cm deep under the water;
4) The working environment temperature for the lamp should be between -20
℃
~+45
℃
to ensure the service
life of the lamp;
5) If the lamp is damaged or there is a problem with the insulation of the wire, please do not use it!
6) Corrosive or soluble chemicals will destroy the protection of the lamp housing;
7) The manufacturer is not responsible for the consequences caused by using the power supply not provided
by the manufacturer;
8) If the lamps do not work, please put the lamps together in one place, and then send them back to the
manufacturer for inspection and repair.
It is forbidden to turn on the underwater light outside the water, otherwise it may shorten
its service life and even cause burning of integrated components of LED chips.
In order to connect underwater light, a switching power supply must be used to adapt to the
load power.
For user safety, DR circuit breaker must be installed in the system, and the specifications
are chosen according to the load power.
