Pool connections using Existing AC Pump
Testing the pump
Once all connections to controller and the pump are complete, and voltages and
polarity have been confirmed, FILL LEAF BASKET reservoir with water then the pump
can be started:
1. Switch Internal controller switch ON
The pump has a "soft start function" and will start slowly after 6 seconds and then
spin up to full speed within the next 6 seconds.
NOTE: Looking at the motor from the back (fan) the motor should spin clockwise.
6
SWIMMING POOL
SKIMMER
LOWER
SUCTION
POOL JET
POOL JET
Solar DC Pump
FILTER
HEATER
Existing Pool Pump
SEPARATION VALVES
#1 SKIMMER OUTLET
#2 LOWER POOL SUCTION
#3 SOLAR POOL PUMP SEPARATION SUCTION SIDE
#4 EXISTING AC POOL PUMP SUCTION SIDE
#5 SOLAR PUMP EXIST SPEARATION VALVE
#6 EXISTING POOL PUMP
#7 POOL EXIT TO JET SEPARATION
#8 POOL EXIT TO JET SEPARATION
CHECK VALVES
#7 SOLAR DC PUMP EXIT SIDE
#8 EXISTING POOL PUMP EXIT SIDE
