Figure 12
3. OPERATION NOTES
4. TO OPERATE THE LIGHT
4.1 WHITE ONLY, WARM WHITE ONLY, OR OTHER SIGNLE COLOR LIGHTS
1. SAFETY WARNING: Keep any person from contacting or stepping upon the light when it’s
ON in a pool unless the lens is extra adequately guarded. Otherwise it may cause serious
injury to pool users or bystanders or damage to property due to the split of the lens.
2. SAFETY WARNING: Never operate this underwater light for more than 1 minute unless it is
totally submerged in water. Without total submersion, the light could get extremely hot, which
may result in serious burns or in breakage of the light or its lens. This may result in serious
injury to pool users, installers, or bystanders or damage to property.
IMPORTANT: Check the waterproofing performance of this underwater light every time the
light fixture is disassembled. Replace the old waterproof fittings when necessary.
NOTE: The pool electrical system should be verified at least once every month with a pool and
spa electrical qualification test kit. This inspection must be performed by a trained and certified
personnel.
②
REPALCING A FLAT LED BULB
Figure 11
NOTE: To prevent risk of fire which could result in property damage, and to ensure optimum
performance, do not exceed the load factor specified in the instruction provided by the
transformer manufacturer.
WHITE ONLY or WARM WHITE ONLY, or any other single color lights are not dimmable, and
are not compatible with dimmer switches or dimmer relays. These lights can be wired into a
switch to manually turn ON/OFF the lights.
5
