background image

 05 

YOU WILL NEED 

TOTAL ELECTRICAL REQUIREMENTS 

Voltage Rating 

 220 -240AC 

Frequency Rating     50HZ 

Power Rating 

 3.0KW 

Other than steam generator 

Internal Circuit Voltage is     

 12V 

Internal Current Rating     

 0.17A 

Your electrical contractor should understand 

ALL 

legal requirements of connection before undertaking any work or installation. 

UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF!!!

 

 Note for electrician. This product comes with 13 amp plug(s) fitted with an RCD unit. We leave it this way for you to connect this your own way due to continued additions 

to current regulations. As at October 2010 we offered two methods. 

1) Connect within current laws and IP directives using plug and RCD provided with steam version or supply one for non steam version

2) (Preferred) Wire into isolated fused feed connecting directly to the house consumer/service box. Remove the fitted plug and ensure the Consumer unit has capabilities to

replace RCD feature if RCD is removed. 

Always use protection against electrical surge. Your shower should be treated the same as a home computer. A surge protector should eradicate the possibility of either 

the transformer or computer control  being burnt out. Please note earth is required and found on chassis of shower tray. A further earth is required from Steam Generator 

unit. Each earth must ground through power supply line. 

Requirements 

 Scissors 

 Stanley Blade 

 Silicone Gun 

 Spirit Level 

 Tape Measure    Philips Screwdriver    Electric Drill 

Summary of Contents for GT-0532

























Reviews:

Related manuals for GT-0532