background image

USER'S GUIDE R10 AXIAL FAN , Code: 0000, Iss: 3.02.2020

01

SAFETY

&

When unpacking the unit, hold the blades close to the centre (maximum stability) or hold the 
motor housing and lift it out very gently and carefully. Shocks have to be avoided by all 
means! Wear safety shoes and cut-resistant gloves.
This appliance should only be installed or opened by qualified personnel.
This appliance can be used by children aged from 8 years and above and persons with 
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they 
have been given supervision or instruction concerning use of the appliance in a safe way and 
understand the hazards involved. Children shall not play with the appliance. 

Cleaning and user maintenance shall not be made by children without supervision.
This appliance is intended solely as a built-in component and should not be operated 
otherwise. Sufficient protection against accidental contact according to the machinery 
directive 2006/42/CE must be safeguarded, especially for the rotating parts. Should there be 
a malfunction, it must be ensured that the parts breaking off or flying away cannot cause 
serious damage or bodily harm. 
Do not operate this appliance in an explosive atmosphere!
When connecting the unit to the power supply, dangerous voltages occur. Do not open the 
unit within the first 5 minutes after disconnection from the power supply. Make sure that the 
unit is insulated.
Parallel operation of several units can cause dangerous charges of >50

µ

C between AC line 

terminals and PE after disconnection.
With control voltage fed, the motor will restart automatically after a power failure.
Means for disconnection must be incorporated in the fixed wiring in accordance with the 
wiring rules.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or 
similarly qualified persons in order to avoid a hazard.
The electronics housing can get hot.
The risk of pulling into rotating part. Do not wear any loose clothing (e.g. tie) or jewellery.
Long hair must be protected with a cap. Risk of injury!

0

© Copyright  HIDRIA d.o.o., All rights reserved. Document is subject to change without prior notification.

2 / 8

Summary of Contents for R10R-63LPS-ES50B-03C11









Reviews: