Easy HD Expressway!
WWW.HIDES.COM.TW
1
6
8.
And wait until the disk is detected well, as shown below.
9.
Type the following three
command lines (shown in bold)
one by one,
mount /dev/sda1 /mnt; cd /mnt
Comment: If there is an error message “mount: mounting /dev/sda1 on /mnt failed” when you type “mount /dev/sda1
/mnt; cd /mnt”, please unplug and plug USB disk, then try again.
If it successes, there is no message.
./updateFW.sh
Comment: If it successes, there are some messages,
kernel version is : 3.0.8
Ready copy driver and sdkCam2TV_UART !!
copy 1080P configure file
cd /;umount /mnt
Refer to the following example,