FINAL ASSEMBLY
1
Assemble two links pivot sets attaching three link bushings to
one triangle plate (outer cones to bushing) using link screws.
2
3
Put bed heads bearing on desk sides carefully, aligning holes
(see detail in sketch STEP 2) provided for link bushings. In
both sides in turn, place from outside the link pivot set into
link holes as shown. Slightly displacing or rising the bed as
required to push the link in place.
Fix the remaining triangle plates (A7) with link screws to link
pivot. Tighten screws, re-check tightening all screws.
2
3
SLIGHTLY HEAVY - BE CAREFUL
Hidden
bed
TM