Page 16 of 22
July 2016
VertX EVO V2000 Installation Guide, 72000-901, Rev. A.5
A.5
Update System
Update System allows the user to update the firmware on the interface panel. During a
download the interface panel image flashes between grey and yellow. When a download
completes the image color changes to green for successful or red for failure. If the
download fails, view a tool tip with the error status code by hovering your mouse over the
image in question.
Initially, all of the interface panels are selected by default to be updated
Note
: Depending on the VertX controller and system, it may take several minutes to
complete a download.
A.6
Battery Replacement
Do not replace the battery while power is applied to the VertX EVO Controllers.
Remove the cover.
Insert the battery (with the + (positive) side facing upwards) under the prongs, lowering the
opposite side into place. Reinstall the cover.
To remove the battery, remove cover, lift the side opposite from the prongs first and slide
the battery out of place away from the prongs. Reinstall the cover.
CAUTION: Risk of fire, explosion and burns. Do not recharge, disassemble or dispose of in
fire.
