pivCLASS How to Order Guide – D00456, A.4
May 2013
© 2012-2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
Page 5 of 11
pivCLASS Bundles
Bundles consist of two (2) pivCLASS readers and one (1) pivCLASS Authentication Module (PAM). You must be a pivCLASS Certified Reseller to purchase these
bundles. To obtain the desired bundle part number first determine the individual pivCLASS reader part number and then insert a “B” in front of the Base Part Number
as shown below. First year maintenance and support is mandatory with every PAM and must be purchased separately (not included with Bundle purchase).
Description
Part Number
Base
Part No.
125 kHz
Interpreters
1
13.56 MHz
Interpreters
Controller
Communications
2
Controller
Hardware
Connection
Product
Version
Color
Security
3
Specific
Configuration
Settings
4
Qty 2 x
pivCLASS R40-H OR
pivCLASS RP40-H
Contactless Smart Card Reader:
Finished Reader, Wall Switch
Qty 1 x
pivCLASS Authentication Module
(Model: M2000)
Authentication module hardware,
firmware and installation guides.
Includes PAM with plastic enclosure
and mounting plate.
B920
N = Without Prox
P = With Prox
(Std)
H
(contactless)
P = RS485 HDX
R = RS485 FDX
(See note 2)
N = Pigtail
T = Terminal
Strip
E
K = Black
G = Gray
0 =
Standard
E = Elite
XXXX
Qty 2 x
pivCLASS RKCL40-P OR
pivCLASS RPKCL40-P
Contactless and Contact Smart
Card Reader: Finished Reader,
Wall Switch, Key Pad, LCD
US Double-Gang Size
Qty 1 x
pivCLASS Authentication Module
(Model: M2000)
Authentication module hardware,
firmware and installation guides.
Includes PAM with plastic enclosure
and mounting plate.
B923
N = Without Prox
P = With Prox
(Std)
P
(c
contactless)
P = RS485 HDX
R = RS485 FDX
(See note 2)
N = Pigtail
T = Terminal
Strip
E
K = Black
0 =
Standard
E = Elite
XXXX
1
125 kHz Prox Interpreters
Order P for standard format support = HID Prox, AWID, EM4102 and Indala (10022 – 26-bit).
All pivCLASS readers support high frequency 13.56 MHz technology.
2
Controller Communications
R = Default option. Supports both Wiegand out and full duplex (FDX) RS485. Reconfigurable in field from Wiegand to RS485 using a programming card. FDX required for use with PAM.
P = Supports both Wiegand out and half duplex (HDX) RS485 with OSDP v1 protocol. Reconfigurable in field from Wiegand to RS485 using a programming card. HDX is not supported by PAM.
Factory configuration option for Wiegand mode is determined by the “Specific Configuration Settings”, see note 4 below.
3
iCLASS Security Options (Factory or Field Configurable)
0 = Standard Security (Version 1) Keyset – compatible with iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 credentials.
E = Elite, reads only SE Elite
TM
credentials with unique matching keys – compatible with iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 with matching Elite keys. Line item
on PO requires ICE reference number.
4
Specific Configuration Settings
Identifies all firmware configurations including Wiegand output settings, PAM and OSDP mode settings and audio/visual settings (e.g., default setting): buzzer on, LED normally red, flashes green on read, buffer one key, no
parity, 4 bit message. Use the pivCLASS, iCLASS SE, multiCLASS Configuration Guide located on the HID Global PIV & FIPS 201 Solutions web page (
https://www.hidglobal.com/government/piv
) to obtain the complete
reader part number.
