background image

Page 2 of 25 

June 2016  

 

 

OMNIKEY 5121 Ethernet Encoder User Guide, L001436, Rev. 2.0 

Copyright 

©2009 – 2016 HID Global Corporation/ASSA ABLOY AB. 

All rights reserved. This document may not be reproduced, disseminated or republished in any form 

without the prior written permission of HID Global Corporation. 

 Trademarks 

HID, HID Global, the HID logo, and OMNIKEY are the trademarks or registered trademarks of HID 

Global Corporation, in the U.S. and other countries. 
The information contained in this document is provided “AS IS” without any warranty. 
HID Global hereby disclaims all warranties and conditions with regard to the information contained 

herein, including all implied warranties of merchantability, fitness for a particular purpose, title and 

non-infringement. 
In no event shall HID Global be liable, whether in contract, tort or otherwise for any indirect, special or 

consequential damages arising from the use of the information contained in this document. 

Revision History 

Date 

Description 

Document Version 

June 2016 

Updated to support Version 1.5.0.0 of the OMNIKEY 

5121 Ethernet Encoder. 

2.0 

2009 

Initial OMNIKEY 5121 Ethernet Encoder User Guide. 

1.0 

Contacts 

For additional offices around the world, see 

www.hidglobal.com

 corporate offices. 

North America 

Asia Pacific 

611 Center Ridge Drive 
Austin, TX 78753 
USA 
Phone:  866-607-7339  
Fax:      949-732-2120 

19/F 625 King’s Road 
North Point, Island East 
Hong Kong 
Phone:  852 3160 9833 
Fax:      852 3160 4809 

Europe, Middle East and Africa 

Brazil 

Haverhill Business Park Phoenix Road 
Haverhill, Suffolk CB9 7AE 
England 
Phone:  44 (0) 1440 711 822 
Fax:      44 (0) 1440 714 840  

Condomínio Business Center 
Av. Ermano Marchetti, 1435 
Galpão A2 CEP 05038-001 
Lapa - São Paulo/SP 
Brazil 
Phone:        55 11 5514-7100 

HID Global Customer Support: 

www.hidglobal.com/support

 

 

 

Summary of Contents for OMNIKEY 5121


























Reviews: