20
Main Menu Functions
USB File Access
Allows access to Auto Wave II media storage drive for viewing saved Bitmaps files
on a PC.
• Two files are created when a waveform is saved as a Bitmap.
• The LARG0000.BMP larger 4096x1024 pixel file is a detailed panoramic
view of the waveform. The SMAL0000.BMP is a smaller 320x240 pixel file
which is actual LCD size view of the waveform.
• Files viewed on a PC may be renamed and saved to the PC only.
Note: The WAVA0000.TXT & WAVB0000.TXT files are the raw wave data files used
by Autowave II for storing/viewing saved waves. They cannot be viewed on a PC.
Voltage Range
Used to select voltage range of both channels. Highlight Voltage Range on the
Main Menu and use the Left/Right Navigation buttons to change then press
Select button to set.
• D/- 100V
• Negative -200V
• Po200V
Note: Voltage Range selections are 200V maximum.
Trigger Mode
Use to enhance the acquisition and visibitly of live waveforms. Highlight Trigger
Mode on the Main Menu and use the Left/Right Navigation buttons to change
then press Select button to set.
• Auto
• Manual
Trigger Using
Use to change Single or Dual channel viewing. Highlight Trigger Using on the
Main Menu and use the Left/Right Navigation buttons to change then press
Select button to set.
• CH-1 Single Wave - Trigger uses channel 1
• CH-2 Dual Waves - Trigger uses channel 2 with dual waveforms
• CH-1 Dual Waves - Trigger uses channel 1 with dual waveforms
Summary of Contents for AUTO WAVE II
Page 1: ...USER GUIDE...
