(1)Enter cellmapper.net
(2)Choose your own carrier and band here.
(3) Then enter the coordinate of where you are trying to
install the signal booster, and press Enter key.
(In fact when you open Cellmapper, the map on the right will automatically locate your area if you've given the site
permission to access your location. If you found tower sites that were not even showing up on the map, it may because
the app offsets the locations for security reasons.)
(4) The map on your right will jump to the location, then you can scroll the
mouse pulley, zoom it out, you will see the tower near the location. And
better to take a screenshot of this page for guiding the following installing
steps. If you have any questions, please contact our tech support.
Note: If you need help finding the tower, please contact our tech support
and provide your carrier, band and screenshots taken in the last steps.
The outdoor antenna is usually placed at one of the 4 ends of the roof.
Please choose the position according to the tower’s location. Make sure
there are no barriers between the antenna and the tower.
3.2 Find the cell tower
3.3 Determine the outdoor antenna’s position
03