Hibon NX 12, Installation, Operation And Maintenance Manual

Page: 14 / 25

EN
EN-14 80446693 Rev. B
2. TECHNICAL DATA
“Figure
4 Key”
Dimensions
NX 2 NX 3 NX 5 NX 8 NX 12 NX 18 NX 26
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
A 205 8.07 275 10.83 370 14.57 355 13.98 476 18.74 444 17.48 589 23.19
a 102.5 4.04 162.5 6.40 213 8.39 208 8.19 278 10.94 222 8.74 339.5 13.37
B 284 11.18 284 11.18 284 11.18 336 13.23 336 13.23 414 16.30 414 16.30
D 320 12.60 320 12.60 320 12.60 376 14.80 376 14.80 454 17.87 454 17.87
E 305 12.01 305 12.01 305 12.01 370 14.57 370 14.57 450 17.72 450 17.72
EA/GC 106 4.17 106 4.17 106 4.17 135 5.31 135 5.31 173 6.81 173 6.81
F 142 5.59 142 5.59 142 5.59 168 6.61 168 6.61 207 8.15 207 8.15
G 13 0.51 13 0.51 13 0.51 13 0.51 13 0.51 15 0.59 15 0.59
H 152.5 6.00 152.5 6.00 152.5 6.00 185 7.28 185 7.28 225 8.86 225 8.86
h 151.5 5.96 151.5 5.96 151.5 5.96 187 7.36 187 7.36 224.5 8.84 224.5 8.84
L 485 19.09 555 21.85 650 25.59 671 26.42 791 31.14 848 33.39 993.2 39.10
L1 245 9.65 305 12.01 356 14.02 385 15.16 454 17.87 441 17.36 559 22.01
T 45 1.77 45 1.77 45 1.77 51.5 2.03 51.5 2.03 69 2.72 69 2.72
V 50 1.97 50 1.97 50 1.97 70 2.76 70 2.76 90 3.54 90 3.54
W 60 2.36 57 2.24 58 2.28 81 3.19 80 3.15 102 4.02 102.2 4.02
X 404.5 15.93 404.5 15.93 404.5 15.93 499 19.65 499 19.65 589 23.19 589 23.19
Y 12 0.47 12 0.47 12 0.47 14 0.55 14 0.55 18 0.71 18 0.71
ØZ* 42 1.65 42 1.65 42 1.65 48 1.89 48 1.89 65 2.56 65 2.56
ØR 200 7.87 220 8.66 250 9.84 250 9.84 285 11.22 340 13.39 340 13.39
Ør 160 6.30 180 7.09 210 8.27 210 8.27 240 9.45 295 11.61 295 11.61
ØDN 80 3.15 100 3.94 125 4.92 125 4.92 150 5.91 200 7.87 200 7.87
ØP 18 0.71 18 0.71 18 0.71 18 0.71 18 0.71 22 0.87 22 0.87
ØS 18 0.71 18 0.71 18 0.71 18 0.71 22 0.87 22 0.87 22 0.87
n 8 0.31 8 0.31 8 0.31 8 0.31 8 0.31 8 0.31 8 0.31
* Fitting tolerance range: m6 unless otherwise stated above.
Table 12 -Top and Bottom Shaft blower dimensions
www.fraserwoods.ca