background image

hib.co.uk

+44 (0)20 8441 0352

+44 (0)20 8441 0219

[email protected]

HiB Ltd

. Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN

©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they 

are as accurate as possible. In the interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.

zone

2

zone

2

zone

2

zone

2

zone

2

outside

zone

60cm

60cm

60cm

60cm

75cm

75cm

75cm

75cm

60cm

radius

225cm

225cm

zone

1

zone

2

zone

1

This product is suitable for installation in zones:

All installations must comply with guidelines which are based on a zonal concept. The diagram above illustrates this concept 

and must be followed to ensure the safe installation of electrical appliances in the bathroom. These regulations apply to 

domestic installations only. Installations must be made in accordance with the current IEE wiring regulations and relevant 

building regulations. 

HiB recommends that all electrical bathroom products should only be fitted by a suitably qualified, 

Part P registered electrician.

2

hib.co.uk

+44 (0)20 8441 0352

+44 (0)20 8441 0219

[email protected]

HiB Ltd

. Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN

Technical Information

Power Input: 

220-240V, 50/60Hz

Maximum Ventilation Volume:

 137 m3/hr (±5%) / 38.056 Litres Per Second

Power Consumption:

 16W

Decibel: 

37dB

Dimensions:

 Ø14 x D7.3cm

Electrical Safety Information

HiB recommends that all electrical bathroom products should only be fitted by a suitably qualified, Part P registered 

electrician in accordance with current IEE reguations. Ensure mains power supply is switched off before starting 
installation. Before drilling, ensure there are no hidden cables or pipes in the wall.

Care Instructions

Do not use abrasives or solvents when cleaning this product.

Wipe off all water spillages as soon as possible using a soft, damp cloth.

Aftercare Service

In the unlikely event that this product should fail please contact HiB customer services, contact detail shown below.

Figure 1

Summary of Contents for Turbo 33500









Reviews: