2
Angle Adjustment
Claw In/Out
Adjustment
Claw In/Out
Adjustment
Fixing Preparation (Fig A)
Fixing Brackets (Fig B)
Hanger Adjustment (Fig C)
Mounting Points
location of internal
fixing hole
REAR VIEW
Wall Hung Installation
1. Position the cabinet in a suitable location
(according to the zonal diagram (Fig 1) on
the back page) ensuring that the mains
supply cable is within reach of the cable
connection point of the cabinet. Carefully
mark the desired position of the cabinet
using a soft pencil, ensuring it is level.
2. Remove the cabinet from the wall and using
a spirit level, mark a horizontal line below
the pencil mark, taking into account the
location of the mounting points (Fig. A).
Place brackets on the pencil line paying
attention to the distance between the
hangers on the cabinet. Carefully mark the
position of the holes using a soft pencil.
(Fig. B).
3. Before drilling, ensure there are no hidden
cables of pipes behind the mounting
points. Using a suitable drill bit, drill holes
in the marked positions to a suitable depth.
4. Insert wall plugs level with the surface of the
wall. If fitting to a tiled surface, wall plugs
should be inserted below the tile surface to
avoid cracking. NB. For plasterboard walls,
specialist fixings should be purchased from
any DIY or hardware store.
5. Fix the brackets to the wall using the screws
provided.
6. Carefully remove the small screws along the
top front edge of the cabinet to gain access
to the internal panel(s). (Fig. C) Keep screws
in a safe place.
7. Temporarily hang the cabinet ensuring the
claws on the hangers are securely located
on the wall brackets. Using a spirit level
adjust the cabinet via the screws on the
hangers. (Fig. C).
8. Mark the position of the internal fixing hole
Please Note
You may need to remove the door(s) to aid installation. This can be done by unclipping the
hinges. (There is a release catch at the back of the hinge). DO NOT FIT SHELVES AT THIS STAGE.
Extra care must be taken when handling cabinets with mirrored sides or diffusers, especially when
picking up and putting down the cabinet - do not pick up the cabinet by the diffusers.
