T:
+44 (0)20 8441 0352
F:
+44 (0)20 8441 0219
E:
hib.co.uk
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the
interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
WEEE compliance
Must not be mixed with general
household waste
Trouble Shooting Guide
Symptoms
Possible
Problem
Solution
Device not
paired
Bluetooth
TM
not
activated
Check Bluetooth
TM
is
activated on compatible
device & mirror turned on
Device not
connecting
Only one
device can be
connected to the
mirror at any one
time
Disconnect all devices and
reconnect only one device
No volume
Volume is
controlled from
device
Increase volume on device
No
connection
Out of range
Range is within 8 metres,
move device closer to
mirror
Turn mirror on (Fig. C)
Activate Bluetooth
TM
(Fig. E)
Play content from device (Fig. F)
Pairing Device To the Mirror
•
To activate the Bluetooth
TM
, turn on mirror by the IR sensor located on the bottom right of the mirror (see Fig. C). The mirror will give out a tone to confirm it is ready for pairing.
•
Activate the Bluetooth
TM
on your device* (see Fig. E). Refer to the device’s instructions for details.
•
Searc
h for “HiB001”. If prompted for a connection code, use “0000”. Th
e mirror will give out a tone to confirm successful connection.
•
You can now play music or other media through the Bluetooth
TM
mirror (see Fig. F).
•
When the mirror is turned off the connection to the Bluetooth
TM
will be lost. When the mirror is turned on again it will automatically reconnect to the last connected device if it
is still within range.
•
Refer to your device manual for operating controls.
•
Music will stop playing when a phone call comes into the Bluetooth
TM
device, and will automatically reconnect when finished.
*Only compatible Smart Phones & Bluetooth
TM
Devices.
Operating Instructions
The heated Pad is only on when the Mirror is illuminated.
This mirror is fitted with colour temperature changing technology.
To switch on/off
Slowly move your hand past the sensor. (Fig. C)
To change the colour temperature
1.
To alter the colour temperature of the mirror,
hold
your hand underneath the sensor (Fig. D), the colour temperature will start to change.
2. Simply move your hand away from the sensor when the desired colour temperature has been reached and continue to operate the mirror as
normal - the chosen colour temperature will remain even after power is switched off and on again.
To change colour temperature (Fig. D)
