T:
+44 (0)20 8441 0352
F:
+44 (0)20 8441 0219
E:
hib.co.uk
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the
interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
This product is suitable for installation in zones:
FI
#02 023
R
171124
Ver No.
1.0 Jan 2018
2
&
Outside Zone
All installations must comply with guidelines which are based on a zonal
concept. The diagram above illustrates this concept and must be followed
to ensure the safe installation of electrical appliances in the bathroom.
These regulations apply to domestic installations only. Installations must be
made in accordance with the current IEE wiring regulations and relevant
building regulations.
HiB recommends that all electrical bathroom
products should only be fitted by a suitably qualified, Part P registered
electrician.
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to them
during installation to ensure that your product is fitted safely and that it
retains its high quality finish.
Please retain this leaflet for future reference.
(Fig. 1)
Connect Mirror
Connect 50
Art No. 78763000
Connect 60
Art No. 78764000
Connect 80
Art No. 78765000
Connect 120
Art No. 78766000
Installation
Before installation, ensure the domestic electrical mains supply to
which the mirror is to be connected is turned off. Before drilling,
ensure that there are no hidden cables or pipes in the wall.
1. Position the mirror in a suitable location (according to the
zonal diagram - Fig. 1), ensuring that the domestic electrical
mains supply is within reach of the cable connection point of
the product.
2. Carefully mark the position of the mirror using a soft pencil
ensuring it is level. Remove the mirror and mark the mounting
points (see Fig. A).
Please ensure that all marked mounting
points accurately match up with the fixing points on the
mirror.
3. Using a suitable drill bit, drill holes in the marked positions to
a suitable depth. If drilling through tile, use a ceramic drill bit.
4. Insert wall plugs level with the surface of the wall. If fitting
to a tiled surface, wall plugs should be inserted below the
tile surface to avoid cracking.
NB. For plasterboard walls,
specialist fixings should be purchased, available from any DIY
or hardware store.
5. Screw supplied fixings into wall plugs.
6. Ensure the domestic electrical mains supply to which
the mirror is being connected is turned off.
Connect the
domestic mains supply to the terminal box according to the
wiring diagram opposite (Fig. B).
7. Hang the mirror in position. Secure the mirror to the mounting
point on the underside of the mirror with the screw provided.
8. Switch the domestic electrical mains supply for the mirror
back on.
Wiring Diagram (Fig. B)
Care Instructions
To preserve the high quality finish of your HiB product, please ensure you
regard the following care and cleaning recommendations:
Do not use abrasives or solvents when cleaning this product.
Wipe off all water spillages as soon as possible using a soft cloth.
In the unlikely event that this product should fail please contact HiB
customer services, contact detail shown below.
Charging Socket
The charging socket is suitable for charging and powering electric razors,
trimmers and electric toothbrushes.
NB. On first use of the charger socket,
inserting the plug may prove to be stiff. Reasonable force may be required
to fully insert the plug. After a few uses, stiffness will ease and the socket will
function as normal.
USB port(s)
USB port(s) are suitable for charging smart devices. Some mirrors may
contain multiple USB ports.
Warning: the USB port(s) are designed to
charge small smart devices and should not be used to power or run large
devices such as hairdryers or other large bathroom appliances.
Mounting point diagram (Fig. A)
mounting points
REAR VIEW
Mounting points
live
earth
neutral
MAINS SUPPLY
LUMINAIRE
Live supply can be Red or Brown
Earth supply is Green and Yellow
Neutral supply can be Blue or Black
Live supply is Brown
Earth supply is Green and Yellow
Neutral supply is Blue
