Hi-view ME series User'S Installation And Operation Manual Download

Page: 18 / 69

Page 18

mouse in the screen to select a section and then left click mouse to realize local zoom. You can right click

mouse to exit.

3.5.3 Record Mode

Please check current channel status: “

○

” means it is not in recording status, “

●

” means it is in

recording status.

You can use desktop shortcut menu or click [main menu]> [recording function]> [recording set]

to enter the recording control interface.

Picture 3.8 Record Mode

【

Schedule

】

Record according to the configuration.

【

Manual

】

Click the all button and the according channel is recording no matter the channel in any

state.

【

Stop

】

Click the stop button and the according channel stops recording no matter the channel in

any state.

Summary of Contents for ME series






































































Search results

Summary of Contents for ME series

Reviews:

Related manuals for ME series

Brands by name

Popular brands

Hi-view ME series, User'S Installation And Operation Manual

Search results

Summary of Contents for ME series

Reviews:

Related manuals for ME series

Brands by name

Popular brands