Hi-Tech GSM+PSTN Touch Screen Wireless Alarm System, User Manual, Page: 5 / 13

Here need to setup only based on linking network. Operations: ENT + press
“ ” button to delete old X X X X +
ENT
】
→ “X X X X”: 4 digits, you can set 0000~9999. Default set before shipping is at ransom.
【
Upload status
】：
This is for uploading Arm/Disarm/Alarm information to the Managing Centre. Operations:
【 ENT + “▲▼” + ENT 】 → “▲▼”
choose “yes” or “no” for upload or not upload. The defaulted is “No”.
【
CutWire Alarm
】：
This is for PSTN (landline) only. ENT + CutWire Alarm, press
“▲▼” to choose YES or NO. If choose “Yes”,it will alarm when
telephone line is not connected. Default set before shipping is
“Yes”.
【
Zone Attribute
】：
Here is for setting
【
Zone number
】
,
【
Zone type
】
,
【
Alarm Type
】【
Bypass Zone
】
&
【
Entry Delay Set?
】
.
---
【
Zone number
】：
Here has 39 zonesfor your settings. 2 dedicated zones for remotes(Supports up to 4 remotes or wireless keypads per zone).29
wireless zones(Each zone supports up to 4 sensors) and 8 optional wired zones. Each zone needs to setup
“Zone Type”, “Alarm
Type
” ,“Bypass Zone” & “Entry Delay”.
Table 3:
“Zones Number” setting
Zone
Number
Sensor Type
Zone
Type
Applicable sensor names Notes
00
、
01
Wireless sensors
——
Wireless remote & Wireless Keypad
Each zone
support up to 4
sensors
02 ~ 10 Emergency zone
Wireless Smoke Alarm,
Wireless Gas Alarm& Panic button etc.
11 ~ 20 Perimeter zone
Wireless Door/Window Sensor &
Wireless Curtain PIR etc.
21 ~ 30 Motion zone Wireless Wide-Angle PIR Motion Sensor etc.
31 ~ 38 Wired sensor
——
31,32,33 are Perimeter zone
34,35 are Motion zone
36,37,38 are Emergency zone
See Table 4:
Wireless/wired
sensor code
【
Zone Type
】：
You can see
“2”, “1”, “0”.( “2” mean motion zone, “1” means perimeter zone, “0” means emergency zone)
Press
“▲▼” to choose the one you desire to setup, then press ENT to confirm your settings.
【
Alarm Type
】：
【
ENT + Alarm Type+ press
“ ” button to delete old X X + ENT 】 → “X X”: 2 digits. Alarm type code. 2 digits.( See
below table. )
Table 4: Wireless/wired sensor code
Table 5: Default set before shipment
Wireless sensors
Wireless
remote
Wireless door
sensor
Wireless
wide-angle
PIR sensor
Wireless gas
sensor
Wireless
smoke sensor
Zone Number 00 11 21 02 03
【
Bypass Zone
】：
This setting is for make zones enable or disable. Here has
“Yes” & “No” for your alternatives. “Yes” means make this zone‟s
sensors silent,
“No” means keep this zone‟s sensors working. Press “▲▼” to choose “Yes” or “No”, then press ENT to confirm
your settings.
【
Entry Delay Set?
】：
Code 00 01 02 03 04 05 06 07
Sensor
Name
Button0 Button1 Gas Smoke Door Window Glass Motion
Code 08 09 10 11 12 13 14 15 20
Sensor
Name
IR Perimeter Perimeter Motion Sensor Sensor Sensor Sensor (doorbell)