Hi-Tech GSM+PSTN Touch Screen Wireless Alarm System User Manual Download Page 1

User’s manual for GSM+PSTN Touch Screen Wireless Alarm System   

 

I. Foreword 

Thank  you  for  purchasing  and  using  GSM/PSTN  LCD  touch  screen  wireless  home  alarm  system.  This  is  a  Hi-tech 

household security product. It will make your life safer and colorful.   

Please read the below information carefully before using for a proper usage. 

 

II. Brief introduction of the Product 

A. Product components: This product is composed of alarm host, basic accessories and optional accessories. 

Alarm Host 

Basic Accessories 

Wireless Optional Accessories 

GSM/PSTN LCD 

Alarm Host 

remote, wireless intelligent door sensor(or wireless door 

sensor) wireless wide-angle PIR sensor, , wireless indoor siren 

with sound and flash 

gas  alarm,  smoke  alarm, 

wireless 

keypad, 

wireless 

outdoor siren, doorbell button 

                                                                 

Table 1: Product components 

 

III. Function Features

 

1. 

Touch keypad; LCD displays Date, Day of the week, Time, and current Armed Status 

2. 

Supported Languages:  Simplified Chinese\ Traditional  Chinese\ English\ German\ French\ and more to meet different 

market needs.. 

3. 

2 /4 Band GSM/PSTN dual net-work. Support    phone call alarm and SMS alarm,    automatically switch to GSM dailing 
when telephone line is cut.   

4. 

29 wireless zones (Each zone supports up to 4 sensors) and 2 dedicated zones for remotes (Supports up to 4 remotes 

or wireless keypads per zone). Sipports 8 more wired zones(Optional). 

5. 

Can preset up to 5 phone numbers and dial in sequence.   

6. 

Intelligent logic analysis technology, corresponding zone number and sensor name can be displayed. 

7. 

Record up to a 10 second greeting for the auto-dialer, Then play the greeting back. 

8. 

Arm\ Disarm the system by 5 ways: SMS, Main Host(Keypad), Wireless Keypad, Keychain Remotes, or even remotely 
by phones. (PSTN alarm don‟t support SMS) 

9. 

Available in AC\DC with Low-voltage Indicators 

10.  Learning sensors to alarm host, very easy operation. 

11.  Non-volatile chip, information stored automatically when off power. 

12.  Check door\window status automatically (This is when the system is disarmed only, if a door is opened, it will sound fast 

“bi bi bi”) 

13. 

Support wireless “ding-dong” doorbell function (Optional) 

14.  Support CID uploading to CMS(Center monitoring Station) , can user our GSM CID connector to have this function. 

15.  Disconnection alarm, auto priority to occupy the telephone and monitoring function to hear what is happening. 

16. 

Built-in Li-Ion backup battery, it will alert when low power or without external power supply.

 

17.  Store up to 100 alarm records and 100 arm\disarm records 

 

IV. Understanding of the Products   

 

 

A. Understanding of the Alarm Host 

Summary of Contents for GSM+PSTN Touch Screen Wireless Alarm System














Reviews: