Hi-Target ZTS-320 Series Manual Download Page 69

Page: 69 / 97

2.MLM (A-B, B-C): measure A-B, B-C, C-D…. i.e the

previous point is the reference point of all the other points.

You may also have to choose „Considering Grid scale‟ or to

„Ignore Grid scale‟ before choosing measurement mode.

MLM (A-B, A-C)
1. Enter the interface of „MLM(A-B,A-C)-Step 1‟.

2.You may measure the coordinate of the starting point by

pressing soft key „Meas‟ under this page,or you may enter its
coordinate manually by pressing soft key „Coord.‟

Press ‟ENT‟ to enter the interface of „MLM(A-B,A-C-Step

2)‟ . Please enter the the height of target before measurement.

3. Enter the coordinate as the same way of the process on

„step-1‟ page. Then,press „ENT‟ to enter the interface of

„MLM(1-B,A-C)-Result‟ .

4. Then,it displays the result of MLM measurement. You

can press soft key „Next P.‟ to continue MLM Measurement, and

repeat the „Step-2‟ and „Result‟ pages.

The measuring process under MLM(A-C,B-C) is all the

same as that of MLM(A-B,A-C). See reference above.

MLM(A-B,A-C)-Result
dSD:                -3.852
dHD:                -3.836
dVD:                0.344m
HR:        90°30′35″

Next P

MLM(A-B,A-C)-Step2

VZ: 69°12′13″

HR:              210°58′15″
HD:                          5.268m

Meas

T.H

Coord.

Mode

MLM(A-B,A-C)-Step1

VZ:                69°12′13″
HR:              170°12′21″
HD:                          4.358m

Meas

T.H

Coord.

Mode

Summary of Contents for ZTS-320 Series


































































































Search results

Summary of Contents for ZTS-320 Series

Reviews:

Hi-Target ZTS-320 Series, Manual, Page: 69 / 97

Search results

Summary of Contents for ZTS-320 Series

Reviews: