Hi-Target vRTK User Manual Download Page 42

Page: 42 / 43

vRTK GNSS System User Manual

4.1

Data cable

Type-C cable: Used to connect the receiver to a PC for upgrading firmware and downloading static

data.

Figure 4-1-1 Type-C cable

4.2 Antenna

The UHF radio antenna is used in the Internal UHF mode.

Figure 4-2-1 Hi-Survey Road

4.3 Battery & charger

1. Battery: The receiver has a built-in 6900mAh/7.2V battery.

2. Charger: To charge the receiver, use the standard charger. When it is in charge, the power button

light will turn red.

Notice:

If the battery needs to be stored for a long time, it should be charged to about

70% and then placed in a dry, low-temperature environment. It is recommended

that you charge and discharge the battery every 3 months. If you do not have the

conditions that are needed for charging and discharging, take out the battery

after 3 months and charge it to about 70% before storing it once more.

Summary of Contents for vRTK












































Search results

Summary of Contents for vRTK

Reviews:

Related manuals for vRTK

Brands by name

Popular brands

Hi-Target vRTK, User Manual

Search results

Summary of Contents for vRTK

Reviews:

Related manuals for vRTK

Brands by name

Popular brands