Hi-Spec Xcel 1250
Operators Manual
Hi-Spec Engineering reserves the right to make changes or improvements at any time without incurring any obligation to
make such changes on products sold previously.
16
Maintenance
Installing, doing periodical maintenance and performing
repairs may only be done by technically skilled person
unless otherwise indicated.
When repairing, maintaining and cleaning always shut
down the motor, remove ignition key and carefully
observe the instructions in the manual.
Always use the correct tools and wear gloves when
performing any maintenance. If working on a hoisted
machine always ensure decent support.
Damage, including damage caused by insufficient
greasing, is not covered by the warranty.
When servicing gearboxes always ensure that any waste
oil is properly disposed off according to the local
environmental laws.
After the first hour operating, tighten wheel nuts and
check around machine for any problems.
If there is a problem with the machine contact your local
Hi-Spec Dealer or Hi-Spec Engineering Ltd directly.
Correct Maintenance and Inspection Procedures
Learn how to service your machine correctly.
Follow the correct maintenance and inspection procedures shown in this
manual.
Inspect the machine daily before starting.
Walk around the machine checking general appearance.
Check for loose or missing parts.
Always disengage the PTO and stop the tractor engine before greasing and
making any adjustments.
Never operate the machine without safety guards in position.
During operation, some parts of the hydraulic system can
become hot; allow the machine to cool down before
beginning inspection or maintenance procedures.
