background image

Owner’s Manual

Page 4 of 6

g. The device may only be used indoors.
h. Ensure that no liquids enter the device.
i. Do not touch the marking tip or marking iron when the device is hot. Danger of burns!
j. Use the device only in well ventilated rooms.
k. Do not eat or drink whilst working with the device. Always wash your hands

thoroughly after finishing work.

l. The mains cable is sensitive to heat. Ensure that the cable does not come into

contact with a hot part of the device or a tip. Damaged mains cables may only be re-
placed with a genuine replacement mains cable, available from the manufacturer or 
the manufacture’s customer service representative. Mains cables may only be re-
placed by the manufacturer, an authorised service centre or a similarly qualified per-
son

m. This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.

This product has been marked with a symbol relating to removing electric and

electronic waste. Electric and electronic equipment can be hazardous for the
environment and for human health since they contain hazardous substances. This means
that this product should not be discarded with household waste but be returned to a
special collection point where it will then be recycled or dismantled in order to reduce the
impact on the environment.

Environmental Protection

Summary of Contents for DT40235








Reviews: