Hi Sharp DVR047-E, User Manual, Page: 8 / 53

8
2) HDD connection
Notice:
-Maximum 2 internal hard drives installed.
-Hard Disk Master and Slave jumper pin must be set correctly, otherwise it makes DVR react faulty.
Hard Disk testing table:
Brand Model Capacity Notice
Seagate Barracuda 80 GB
IBM DeskStar 80 GB
WD2000 Caviar 200 GB
Hitachi DeskStar 80 GB
Maxtor MaxLineII 300 GB
Full screen or quad screen display
Press quad button to display 4 quad screen.
Press numeric 1 / 2 / 3 / 4 buttons to display a desired camera image in full screen.
Picture
1. Make sure the HDD is MASTER.
2. Make sure the cable connector is
correct.
3.
Please check the HDD panel for
Master set up.
1. Make sure the HDD is MASTER and
SLAVE.
2. Make sure the cable connector is
correct.
3. Please check the HDD panel for
Master and Slave set up.
HDD
MASTER
MAIN BOARD
I/O BOARD
Set the drive jumpers as specified by hard disk drive manufacturer.
1
2
3
1
3
2
tie
HDD1
HDD2
MASTER
SLAVE
MAIN BOARD
I/O BOARD
Set the drive jumpers as specified by hard disk drive manufacturer.
2
1
3
1
How to connect single HDD
2
How to connect 2 HDD