Hi-ltte HL-150BSW LED, User Manual, Page: 7 / 16

Note:
Upon receipt of lamps, please check if there is damage to the fold closure caused by
transport, where there is transportation damage, please do not use this fixture, and contact
us as soon as possible
Users should ensure that light and installation materials are checked for regular safety checks,
Unprofessional incorrect installation can lead to dangerous, if the lack of working conditions and professional
standards, please operate the light by profession
als. Do not use the light if the working temperature isn’t
-15°-40° .When the lighting installation, dismantling, moving, or servicing, do not stand directly beneath the
lamp. The operator must ensure that the fixtures are securely connected, installing the light after
professionals approving electrical parameters make sure that these installation must be checked at least
once per year by experts.
5. Installation
5.1 Installating rigging
150W LED 3 In 1 moving head lights can be placed on the stage or on a stand in any direction.
Quick lock system can quickly and easily remove or install a light hook.
Note:
Must use two clamps fixed equipment, and are 1/4 buckle fastening jig, only fully rotated
90 degrees clockwise to lock fastener.
5.2 Fixed equipment
1. Before installing fixtures must verified rigging equipments
are not damaged, and can bear at least 10 times of light’s
weight. Check the building can be beared at least 10
times of total weights of light, fixture, and cable
accessories
2. Insert the locked hook fastener into base mounting holes
horizontally, grab the handle clockwise 90 degrees
fasteners, in the same way to install a second fastener,
make sure the fastener is fastened under the light base.
3. If truss can be lifted the equipment can be directly
clamped from flight case and locked fixture base. Then
hung on the light and fixed it. Before rising the light to right
height, connect the power cord and signal cable.