深圳市海凌科电子有限公司
Shenzhen Hi-Link Electronic Co.,Ltd
Http://www.hlktech.com
Tel:0755-36989385 Fax:
0755-83575189
10/49
4.4
Default Mode
Picture 6.Default mode model
In this mode, WIFI enable, module works in the AP mode, ETH1
、
ETH2function enable.ETH1
works as WAN,ETH2 works as LAN.Through the appropriate settings,data between COM1
and network can achieve mutual conversion.
WIFI safety: support all encryption methods at present.
In this mode, WIFI device can connect with the module and become the device under WIFI
LAN.
WAN default IP is dynamic IP address.LAN
、
WIFI for the same local area network, enable by
default DHCP server.
4.5
Serial work mode switching
Module serial work status is defined as two modes: transparent transmission mode, the AT
command mode.
DHCP ENABLE
SERIAL
HLK-7628N
MCU
WIFI CLIENT
(PHONE
、
pad)
COM1
WIFI
AP
ETH2
ETH1
LAN
WAN
