hi-Fun hi-Ring, User Manual

Page: 8 / 28

Switch on
To switch on hi- R ing Bluetooth hold the middle button ( 3 ) until warning LED
( 1 ) comes on violet. Afterwards hi- R ing Bluetooth automatically connect
itself to the last paired device, if available, and LED flash in blue to confirm
the connection. If there is no available paired device or if it is out of reach
of hi- R ing Bluetooth, it turns off in about 4 minutes in order to avoid battery
dischargnig.
Pairing
To pair for the first time, pair for a second time or to pair to a different
device, hi- R ing Bluetooth must be set in pairing mode, signaled by the
warning LED ( 1 ) which flashes alternately and quickly in red and blue.
To activate the pairing mode you need to switch off hi- R ing Bluetooth and
switch it on holding the central button ( 3 ) until the warning LED ( 1 ) will
flash alternately and quickly red and blue.
Now you can select hi- R ing Bluetooth from the list of found devices on
your device. As soon as the device is paired the warning LED ( 1 ) flashes
slowly in blue.
Now is possible to make and receive calls with hi- R ing Bluetooth.