Operating Instruction Manual:
OM-TPE-A-01
Serial Numbers:
All
1
OPERATING INSTRUCTION MANUAL
TPE-A SERIES | ELECTRIC DRIVEN TORQUE WRENCH
PUMPS - PREMIUM LINE (ANALOGUE)
Hi-Force TPE series Electric Driven Torque Wrench Pumps are premium pumps designed for use with
Hi-Force Hydraulic Torque Wrenches. TPE Pumps can be used to power up to 4 torque wrenches
simultaneously (all operating at the same pressure). Output pressure is fully adjustable and can be set to
any value up to a maximum working pressure of 700 bar (10,000 psi). This manual applies to the Hi-Force
TPE series Analogue, Electric Driven Torque Wrench Pumps Only. It contains the latest product information
available at the time of publication and approval. For information relating to the servicing of an Electric
Driven Torque Wrench Pump, see the servicing instructions, which are available on the Hi-Force website.
Hi-Force reserves the right to make changes to this document at any time without notice.
This
‘Original instructions’ document assumes that the operator carrying out any operation with this
product is trained and competent to do so. This manual does not attempt to cover all details or variations
in the equipment. Nor does this manual claim to provide for every possible contingency met in connection
with the installation, operation, or maintenance thereof. Should further information be desired, or should
a particular problem arise which is not covered in sufficient detail, the matter should be referred to
Hi-Force.
