TDS1343
1010
BATTERY CHARGING
Batteries should be charged using HI-Force charger supplied (or a HI-Force charging
accessory supplied separately)
Connect charger to the mains. Select the correct voltage (14.4 volt) by pressing the
“select voltage” button until the appropriate LED lights up. Insert battery and charge
for 2-3 hours.
To prolong battery life, discharge fully, using the “discharge” button. Do not carry out
this operation on a fully charged battery.
MAINTENANCE
•
Keep your Hi-Force crimper set free from dirt, sand and grease at all times.
Any contamination will greatly reduce the Crimper effectiveness. Crimpers
come complete with either storage boxes or bags. Always store your Hi-Force
Crimper Set properly.
•
Regularly check all fastenings to ensure they have not worked loose.
•
Always fully retract the Crimper Head Piston between operations and while
stored. Leaving the Piston extended will weaken the Retraction Spring and
also leave the piston exposed to damage/ corrosion.
•
For major overhauls/ repairs contact HI-Force or your nearest Hi-Force
service centre.
