Hi-Flame HF-717UA Installation And Operation Instructions Manual Download Page 23

22 

 

Hi Flame America, Inc. Warranty 

Warranty Policy & Procedures 

If you believe your Hi Flame® stove is defective, you should contact your nearest authorized Hi 
Flame America stove dealer, who will process a warranty claim. In order to qualify for warranty 
coverage, Hi Flame America must receive notice of a possible defect within thirty (30) days of 
being discovered, or reasonably could have been discovered. 

Hi Flame America offers the original retail purchaser of Hi Flame Solid Fuel burning products a 
limited 7-year warranty. The following outlines the Hi Flame America warranty program. 

This warranty applies to the original retail purchaser only. Hi Flame America warrants that this 
stove or fireplace insert will be free of defects in material and workmanship for a period of up to 
seven years from the date of purchase. Hi Flame America will ship, at no cost to the retailer, 
and the retailer will help you replace the parts or repair at their option, any stove or fireplace 
insert or part thereof found to be defective. 

DESCRIPTION 

Warranty Defined 

Parts 

Labor 

Cast Iron Parts 

7 Years 

1 Year 

Firebox (welding only) 

5 Years 

1 Year 

Handle Assembly 

5 Years 

Not Included 

Ash Pan 

5 Years 

1 Year 

Baffle Set 

3 Years 

1 Year 

Ceramic Glass (Thermal Breakage ONLY) 

1 Year 

Not Included 

Fire Bricks 

1 Year 

Not Included 

 

Customer must first submit 3 digital photos to the dealer from whom the product was purchased, 
along with an explanation of the problem. This will initiate a warranty claim. If a response is not 
received within 2 business days, please contact Hi Flame America directly at 201-625-1978 
(9am - 5pm eastern, M-F) or email us at [email protected] so we may put you in contact with a 
customer service representative. 

If any damage is found to be the fault of the manufacturer, the repair or replacement will be 
made. This warranty does not include expenses incurred from travel time or loss of service. This 
warranty is not transferrable and is extended only to, and is solely for the benefit of, the original 
retail purchaser of the stove/fireplace insert. Please keep your dated sales receipt as proof of 
purchase. 

 

 

Summary of Contents for HF-717UA

























Reviews: