HHP IMAGETEAM 5600, User Manual

Page: 58 / 144

6 - 4
Presentation Mode: The LEDs are off until a bar code is presented to the
scanner. Then the LEDs turn on automatically to read the code. Presentation
Mode uses ambient light to detect the bar codes.
Manual Trigger, Low Power: Scan the Manual Trigger, Low Power bar code
below and the scanner “sleeps” until the trigger is pulled. When the trigger is
pulled, the scanner wakes up and operates at normal power until there is no
triggering for the time set with the Low Power Time Out bar code. Then, the
scanner goes to “sleep” again.
Low Power Time Out:
Scan the Low Power Time Out bar code to change the
time out duration. Then scan the time out duration (from 0-300 seconds) from
the inside back cover and
Save .
Default = 120 minutes.
Presentation Mode
Manual Trigger, Low Power
Low Power Time Out